Geopsy: Spectrum parameter file

• Parameters stored in this file come from the settings in the Spectrum Toolbox

### Parameters ###
SIGNAL FILE NAME = Strong_peak
WINDOW MIN LENGTH (s) = 25
WINDOW MAX LENGTH (s) = 50
WINDOW LENGTH TYPE (at least/exactly/freq. dep.) = exactly
DO BAD SAMPLE TOLERANCE (y/n) = n
BAD SAMPLE TOLERANCE (s) = 0
DO WINDOW OVERLAP (y/n) = n
WINDOW OVERLAP (%) = 5
DO BAD SAMPLE THRESHOLD (y/n) = n
BAD SAMPLE THRESHOLD (%) = 99
ANTI-TRIGGERING ON RAW SIGNAL (y/n) = y
USED RAW COMPONENTS = y, y, y, n, y
RAW STA (s) = 1
RAW LTA (s) = 30
RAW MIN SLTA = 0.2
RAW MAX SLTA = 2.5
ANTI-TRIGGERING ON FILTERED SIGNAL (y/n) = n
FILTER TYPE (low pass/high pass/band pass/band reject) = low pass
FILTER METHOD (butterworth/taper) = taper
FILTER MIN FREQUENCY (Hz) = 5
FILTER MAX FREQUENCY (Hz) = 10
FILTER CAUSAL (y/n) = n
FILTER ORDER = 1
FILTER WIDTH = 0.1
USED FILTERED COMPONENTS = y, y, y, n, y
FILTERED STA (s) = 1
FILTERED LTA (s) = 30
FILTERED MIN SLTA = 0.2
FILTERED MAX SLTA = 2.5
SMOOTHING TYPE (konno & ohmachi/constant band/proportional/no smoothing) = konno & ohmachi
SMOOTHING CONSTANT = 40,00
DO COSINE TAPER = true
TAPER WIDTH = 5
DO HIGH PASS = false
HIGH PASS FREQUENCY = 1
MINIMUM FREQUENCY = 0.5
MAXIMUM FREQUENCY = 20
INVERSED FREQUENCY = n
SAMPLES NUMBER FREQUENCY = 1000
SAMPLING TYPE FREQUENCY (0=log, 1=linear)= 0
### End Parameters ###