View source for Effect of very low frequency on H/V

Here, it is displayed how the H/V can be influenced but a low frequency content in the signal. For that purpose, we merge two different signals:

[[Image:Merging_signals.png|300px]]
*one at a site having a resonance frequency around 1 Hz
*one displaying a low frequency component within [0.1-0.2 Hz]

Following the Sesame recommandations, to define a 1 Hz frequency for H/V processing, a 10 seconds window should be enough.  

Then the merged signal is computed in a H/V and Spectrum way with 20, 60 and 100 second.

At first, the processing has been done without high pass filter. In this case, the 1 Hz peak appears only with the 100 seconds windowing.

[[Image:No_high_pass_filter.png|300px]]

Later on, another processing has been done with a 0.5 Hz high pass filter. In this case, the 1 Hz peak appears directly with a 20 seconds windowing.

[[Image:High_pass_filter.png|300px]]