f0 and f1 in .hv file
Posted: Mon Jun 17, 2024 8:11 am
Hi Marc,
In the HV module, when e.g. selecting 2 peaks (Edit-> Select peaks), I noticed in the .hv files that f0 and f1 are given in the order in which they where selected, and f0/f1 doesn't necessarily show the lowest/highest value.
Was this setting deliberately chosen, or is this something to change for future versions?
A simple f0<f1 rule could help to create consistent .hv files.
Cheers
Koen Van Noten
Royal Observatory of Belgium
In the HV module, when e.g. selecting 2 peaks (Edit-> Select peaks), I noticed in the .hv files that f0 and f1 are given in the order in which they where selected, and f0/f1 doesn't necessarily show the lowest/highest value.
Was this setting deliberately chosen, or is this something to change for future versions?
A simple f0<f1 rule could help to create consistent .hv files.
Cheers
Koen Van Noten
Royal Observatory of Belgium